The MP221 preamplifier is a high performance unit built to broadcast standards. Primarily designed to add flexibility to Ampetronic Induction Loop installations, it can also be used in other professional audio systems where the control and mix of audio signals is required.
The MP221 is a four input preamplifier, 2 XLR microphone inputs with phantom power and 1 line level input for balanced or unbalanced connection and a twin unbalanced phono input. The single electronically balanced output can be connected to balanced or unbalanced loads.
The inputs are fully protected. In the event of an overload condition of any amplifier section, the overload warning LED will illuminate.
To increase input options for induction loop systems or for other general mixing arrangements.
|Gain (Factory setting)||66dB|
|Gain switch||(low) 46dB|
|Input referred noise||-124dBu (200Ω source)|
|Input impedance||> 5kΩ|
|Input Impedence||47k Ω|
|Connector||(1/4 inch) 6.3 mm jack socket|
|Input impedance||1MΩ each side, 2MΩ differential|
|Connector||(¼ inch) 6.3mm Jack socket|
|Overload||+16dBu Bal / +10 dBu Unbal|
|Overload LED||On front panel|
|Gain Control||4 (1 per input) on front panel|
|Phantom||Global ON/OFF on rear panel|
|Gain Boost||Internally selectable per channel|
|Width, Depth, Height||107 x 200 x 44mm|
|Voltage, Current||12Vdc, 55mA (region specific power supply included)|
The unit can be rack mounted using the RM-1U rack tray, BPS-1U and BPL-1U blank plates.
London, United Kingdom
True benefit and value to those with hearing loss
Manchester, United Kingdom
Systems to meet the varied needs of the site
Nottingham, United Kingdom