The Ampetronic CLD1AC is designed for the same applications and to the same specifications as the CLD1, however the CLD1AC is fitted with an internal power supply for standalone applications.
The CLD1AC Compact Loop Driver is designed for counter systems and small area perimeter loop systems. Measuring only 180 x 74 x 35mm and with an output current of 2.4A RMS, the CLD1AC is the smallest and highest performance amplifier in it’s class. Designed and built to Ampetronic’s high standards of reliability, backed with a 5 year warranty and Ampetronic support, the CLD1 offers certainty of performance and the lowest lifetime cost available.
Audio quality is ensured with metal loss correction (MLC) combined with Ampetronic’s usual high standards of design. The CLD1 is designed for flexibility and convenience, featuring 2 separate microphone inputs with independent level controls, one of which can be configured as a line input.
All cable connections are made on a single face of the unit, adding flexibility and further simplifying installation.
The CLD1AC compact loop driver can be ordered as a stand alone loop driver or as part of a kit for a specific application.
Counter loop kits comprise 1 x CLD1AC, 1 x pre-formed loop, 1 x microphone (choice), 1 x loop present sign, 1 x installation guide and 1 x power supply (region specific).
|ACCLD001UKCB||CLD1-AC Induction Loop Driver UK Cordset with Q400 Boundary Mic + Loop Coil|
|ACCLD001UKCD||CLD1-AC Induction Loop Driver UK Cordset with EM195A Desktop Mic + Loop Coil|
|ACCLD001UKCT||CLD1-AC Induction Loop Driver UK Cordset with EM-1.2 Tie-clip Mic + Loop Coil|
|ACCLD001UKCX||CLD1-AC Induction Loop Driver UK Cordset no Mic, with Loop Coil|
|ACCLD001UKXX||CLD1-AC Induction Loop Driver UK Cordset, no Mic, no Loop Coil|
When supplied as a counter loop kit, the CLD1AC comes with choice of microphone, a multi-turn preformed loop, power supply and simple installation instructions. The loop should be mounted vertically in accordance with the installation instructions. Other installation methods are also available.
The CLD1AC in this application will project a field to the requirements of IEC60118-4 approximately 1m from the preformed loop.
The CLD1AC is designed for small perimeter loop applications in rooms or in vehicles. Coverage with a single turn loop:
Room aspect ratio: 1:1 2:1 3:1
Maximum area coverage m2: 20 30 35
With maximum current output the CLD1AC can drive:
When operating below maximum output, the CLD1AC can drive longer cable lengths – contact Ampetronic for more details.
Maximum cable length is dependent on cable type and on the application.
|Cable type||Maximum Cable Length (m)|
|1.8mm2 flat copper||tape 101m|
|Power||All integral 100-240v AC 18W max.|
Regional plug also available.
Green LED Power indicator
|Input 1||Microphone input|
Suitable for unbalanced electret microphone
3.5mm mono jack socket
Input impedance 8kΩ.
6v bias via 10kΩ source
Sensitivity -60 dBu for max output
Overload level -14 dBu.
Recessed control on front panel
|Input 2||Switchable line / microphone|
Recessed switch on connector panel
Microphone as for input 1
Input impedance 820kΩ
Sensitivity -20dBu for max output
|Drive voltage||>3.2Vrms >4.5Vpk at maximum output current|
|Drive current||2.4Arms 3.4Apk continuous 1kHz sine wave|
Short term peak >4.8Apk
LED indicator on front panel
|Loop resistance||0.3Ω to 1.0Ω resistive or|
|Loop connector||Vibration proof clamps, accept 0.5 to 1.3mm2|
|Idle||1/6 peak Output Current (Speech)||1/3 peak Output Current (Pink noise)||Full Power|
|Driver||Channels||Current (ARMS)||Load Resistance (Ohms)||AC In (W)||BTU||AC In (W)||BTU||AC In (W)||BTU||AC In (W)||BTU|
|Frequency response||80Hz to 6.3kHz ±1.5dB|
|Automatic gain control||AGC optimised for speech|
Dynamic range >36dB
Green LED indicator on front panel
|Metal loss correction||0 to 4.5dB/octave|
Recessed control on front panel
|Dimensions||180mm, 74mm, 35mm|
|Environment||IP20 : 20 to 90% relative humidity, -20ºC to 50ºC|
|Mounting||Horizontal or vertical panel or wall mount, with 2 screw fixings|
Stage Electrics and Ampetronic support accessibility at Chester Story House Theatre
DASS Solutions and Ampetronic support Dubai in becoming accessible by 2020
London, United Kingdom
True benefit and value to those with hearing loss